Finisher Installation; Attaching The Docking Plate And Guide Rail - Lexmark C910 Service Manual

Hide thumbs Also See for C910:

Table of Contents

Finisher Installation

1. Lift the printer exit tray halfway and remove. You will need the

tray when the finisher is attached.

2. Insert the docking plate tabs into the printer.

3. Align the thumbscrews on the docking plate with the holes in the

side of the printer.

4. Tighten the docking plate thumbscrews.

5. Align the thumbscrews on the guide rail plate with the holes in

the side of the printer cabinet or stand.

General Information