Cabling In The Replacement Chassis; Replacing The Tape Blade Cover; Installing The Coupler Plate - HP EH920A - StorageWorks Ultrium 1760 Tape Drive User Manual

Figure 38 Cabling in the replacement chassis
5. Replace the cover on the tape blade chassis and tighten the screw.
Figure 39 Replacing the tape blade cover
6. Full-height partner servers in a c7000 enclosure only: Attach the coupler plate that you removed
from the faulty chassis to the replacement unit.
Figure 40 Installing the coupler plate
7.
Push the tape blade chassis back into the device bay until it is fully inserted and the enclosure
connectors are fully engaged. The System Health LED will briefly flash red, indicating that the
system is connected.
62
Replacing a tape blade chassis or tape drive