When A Job Is Not Performed - Ricoh Aficio MP 6000 Troubleshooting Manual

When a Job Is Not Performed

If you are not able to carry out your job, it may be that the machine is being used
by another function.
Wait until the current job is completed before trying again. In certain cases, you
can carry out another job using a different function while the current job is being
performed. Performing multiple functions simultaneously like this is called
"Multi-accessing".
Combination Chart
❖ Function Compatibility
The chart shows Function Compatibility when print priority is set to "Inter-
leave". See "Print Priority", General Settings Guide.
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and re-
mote switching (of the scanner/external extension) is done.
: Operation is enabled when the {Interrupt} key is pressed to interrupt the
preceding operation.
→ : Operation is performed automatically once the preceding operation ends.
× : The operation must be started once the preceding operation ends. (Simul-
taneous operations are not possible.)
Function you want to se-
lect
Function in progress
Operations for
Copying
Stapling
Sort
Operations for
Copying
Copying
Copier Facsimile
× × ×
→ →
*1 *1 *5 *2
*1
→ →
*1 *1
*1 *2
× × × ×
× × × ×
When a Job Is Not Performed
Printer
→
*2 *2
*2 *2
×
× → → →
×
*2
*4 *4 *4
×
*2
× × ×
× × × → →
1
13