Connect Copy - Ricoh Aficio MP 6000 Troubleshooting Manual

❖ Connect Copy

Message
Cannot connect to
the sub-machine.
Check the status
of the sub-ma-
chine.
Cannot print from
the sub-machine.
Check the status
of the sub-ma-
chine.
Cannot print from
the sub-machine.
Check the status
of the sub-ma-
chine.
Sub-machine is in
Interrupt mode.
Sub-machine does
not have the same
paper setting(s).
The Cover Sheet
setting(s) of the
sub-machine is
different from
the main machine.
The Slip Sheet
setting(s) of the
sub-machine is
different from
the main machine.
The Designation
Sheet setting(s)
of sub-machine is
different from
main machine.
Sub-machine paper
settings must be
the same to use
this tray.
No stamp data in
the sub-machine.
Messages Displayed When Using the Copy/Document Server Function
Cause
• The L indicator is lit.
• The hard disk of the
sub-machine is mal-
functioning.
A paper misfeed has oc-
curred on the sub-ma-
chine, or toner or other
supplies need to be re-
plenished.
The sub-machine's User
Tools menu is open.
The sub-machine is in In-
terrupt mode.
Paper type or tray set-
tings on the two ma-
chines do not match.
Cover settings on the two
machines do not match.
Slip Sheet settings on the
two machines do not
match.
Designation Sheet set-
tings on the two ma-
chines do not match.
Paper tray settings on the
two machines do not
match.
Stamp data on the sub-
machine has been delet-
ed.
Solution
Press [Exit] on the main machine and
follow the instructions on the display.
Follow the instructions displayed. For
details, see p.99 "Adding Toner", p.105
"Removing Jammed Paper", p.118 "Re-
moving Jammed Staples".
If the sub-machine's display indicates
that a cover is open, follow the instruc-
tions displayed.
Press the {User Tools/Counter} key to
close the User Tools menu.
Press the {Interrupt} key on the sub-ma-
chine to cancel Interrupt mode.
Make the same settings on both ma-
chines.
Make the same settings on both ma-
chines.
Make the same settings on both ma-
chines.
Make the same settings on both ma-
chines.
Make the same settings on both ma-
chines.
Reprogram the stamp on the sub-ma-
chine.
2
21