Messages Printed On The Error Logs Or Reports - Ricoh Aficio MP 6000 Troubleshooting Manual

Messages Printed on the Error Logs or Reports

This section describes likely causes of and possible solutions for the error mes-
sages that are printed on the error logs or reports.
Message
84: Error
85: Error
86: Error
Address Book is
currently in use
by another func-
tion. Authentica-
tion has failed.
Auto-registration
of user informa-
tion has failed.
Cannot store data
of this size.
Collate has been
cancelled.
Command Error
Messages Displayed When Using the Printer Function
Cause
There is no work area
available for image
processing.
The specified graphics li-
brary is unavailable.
Parameters of the control
code are invalid.
The machine currently
cannot perform authenti-
cation because the address
book is being used by an-
other function.
Automatic registration of
information for LDAP Au-
thentication or Windows
Authentication failed be-
cause the address book is
full.
The paper size exceeded
the capacity of the docu-
ment server.
Collate was canceled.
An RPCS command error
occurred.
Solution
• In [Printer Features], under [Sys-
tem], set [Memory Usage] to [Font
Priority].
• Decrease the number of files sent
to the machine.
Check that the data is valid.
Set the parameters correctly.
Wait a while, and then retry the op-
eration.
Contact the administrator.
Reduce the paper size of the file that
you want to send to a size that the
document server can store. Custom
size files can be sent but not stored
afterward.
Turn the main power switch off and
then back on again. If the message
appears again, contact your sales or
service representative.
Check using the following proce-
dure:
• Check if the communication be-
tween the computer and the ma-
chine is working correctly.
• Check if the correct printer driver
is being used.
• Check if the machine's memory
size is set correctly in the printer
driver.
• Check that the printer driver is
the most up-to-date version
available.
4
57