Internal Printer (Op-06) - A&D AD-4405 Instruction Manual

14. Internal Printer (OP 14. Internal Printer (OP- - - - 06)
14. 14. Internal Printer (OP Internal Printer (OP
A dot matrix type printer (OP-06) can be installed in the AD-4405. It can print out the
result of weighing, accumulated weight, date and time, etc. The print format can be
arranged by the F-Function settings or by using the serial interface command.
Print
When in the manual print mode, by pressing the
and pressing the
using format 2.
The print out format is set at f70 for format 1 and at f71 for format 2 of the
F-Functions.
The print out format can be set using the serial interface (OP-03, OP-05 and/or
OP-08). Refer to "16.3.5. Commands to Set the Data Output/ Print Format (UFC)".
The number of repeated printings of the same contents separately, in format 1
and format 2, can be set at f62.
The number of lines that feed before or after the print out separately, in format 1
and format 2, can be set at f63 and/or f64.
The direction of the characters can be set at f65.
Examples
All characters
Initial setting print out
AD-4405 Weighing Indicator
key while pressing the
MODE
Date, time, data number, code, gross and net
Parameters 92 and 95
Page 51
06)
06) 06)
key to print in format 1,
PRINT
key, the print out is done
PRINT

14. Internal Printer (OP-06)