Setting The Interval Time; Interval Data Output / Print Output - A&D AD-4405 Instruction Manual

15.3.1.

Setting the Interval Time

Step 1 By pressing the
be displayed for 2 seconds.
Step 2 Select which interval time to set using the following keys. The item is displayed.
key ....... The key to select serial output int 5i or printer int p to set.
MODE
key .......... The key to return to the weight display.
ESC
key...... The key to proceed to the time setting (Step 3).
ENTER
Step 3 Set the interval time using the following keys. The key operation is the same as the
time settings.
- key.......... The key to set the value at the blinking digit, then the blinking
0 9
key ............. The key to shift the blinking digit to the right.
+/-
key ...... The key to reset the settings and display the interval time stored
CLEAR
key .......... The key to return to Step 2 without changing the interval time
ESC
key...... The key to store the interval time then return to Step 2.
ENTER
15.3.2.

Interval Data Output / Print output

Set the data output mode or print mode to "Manual mode" respectively to interval
data output or print out.
By pressing the
starts and the first data is output or printed.
At the start, the internal printer prints the interval time setting first.
By pressing the
stops and the data at that time is output or printed. The internal printer prints "Intv.
Stop" before printing the data.
The internal printer prints unstable data in the interval print mode.
The internal printer replaces over-range data with spaces and decimal point.
AD-4405 Weighing Indicator
key while pressing the
SETPOINT(3)
digit shifts to the right. (Illegal numbers are ignored) .
in memory.
settings.
key while pressing the
START(7)
key while pressing the
STOP (8)
Page 55
key, intval
PRINT
key the interval timer
PRINT
key the interval timer
PRINT
15. Common Printer and Data Output
will