Cf-Functions - A&D AD-4405 Instruction Manual

6.3. CF 6.3. CF- - - - Functions
6.3. 6.3. CF CF
Item
Cf00
Zero tracking width,
motion detection
condition
Cf01
Zero range
Turning display on, the
range to zero display.
Cf02
Power on zero range
Turning the display on,
the range to zero display.
Cf03
Zero tracking
Cf04
TARE, ZERO in motion /
TARE at negative gross
value
Cf05
Output on overload and
unstable state.
Cf06
Header 2
Cf07
Number of unit digits
Cf08
Accumulation function
Cf09
Digital Tare(PT)
CAP : maximum capacity
Power on ZERO (CF02)
Cf02 0
Cf02 1,2,3

6.3. CF-Functions

Functions
Functions Functions
Parameter
* 0
1
* 0
1
2
3
0
* 1
2
3
0
1
* 2
* 0
1
2
3
* 0
1
* 0
1
2
* 0
1
* 0
1
* 0
1
After power on, the weight display starts immediately.
When the zero range is exceeded at power on, ------ is displayed.
Press the key to start the weight display.
ESC
No limitation
Use limitation at F01, F02, F03, F27 and F28.
2% of CAP, Tare limit is 100 % CAP
10% of CAP, Tare limit is 100 % CAP
3% of CAP, Tare limit is 50 % CAP
4% of CAP, Tare limit is 50 % CAP
Not to zero when turning the display on.
10% of CAP
3% of CAP
4% of CAP
Gross when displaying gross.
Gross
Gross or Net when displaying net.
TARE, ZERO in motion / TARE at negative gross
Not accepted
Execute
Not accepted
Execute
Not to output data at unstable value or overload.
Effective in key mode.
To output data always.
GROSS / NET / TARE / Preset TARE
GR / NT / TR
GR / NT / TR
G_ / N_ / T_
Two digits
Three digits
Not used (Ineffective)
Used (Effective)
Used (Effective)
Not used (Ineffective)
*: Initial settings
Page 32
Description
/ Not accepted
/ Not accepted
/ Execute
/ Execute
/ TR
/ PT
/ PT (_: Space 20h)
Serial output data
AD-4405 Weighing Indicator