Commands For The Hold Function; Commands To Set The Data Output/ Print Format (Ufc) - A&D AD-4405 Instruction Manual

16.3.4.

Commands for the Hold Function

Start Averaging to Hold Start Averaging to Hold Start Averaging to Hold Start Averaging to Hold
Starts averaging to hold. The reply differs with the conditions.
Template
Command
Reply
Release the Hold Data Release the Hold Data
Release the Hold Data Release the Hold Data
Releases the hold data or stop averaging and goes to the normal weighing mode.
Template
Command
Reply
Request Request the Request Request the the the Hold Status Hold Status Hold Status Hold Status
When receiving this command, the average/hold state is returned immediately.
Template
Command
Reply
16.3.5.

Commands to Set the Data Output/ Print Format (UFC)

Set Serial Data Format Set Serial Data Format Set Serial Data Format Set Serial Data Format
Sets the serial output data format.
Format 1 (2) data is stored in the same memory area of F34 (F35).
Template
Command
Reply
Set Print Format Set Print Format Set Print Format Set Print Format
Sets the print out data format.
Format 1 (2) data is stored in the same memory area of F70 (F71).
Template
Command
Reply
AD-4405 Weighing Indicator
HS
H
S
H S
H D , 1
H D , 2
HC
H C
H
C
HD
H D
H D , 0
H D , 1
H D , 2
SFf, [ parameters ]
f: Format number, 1 or 2
S F 1 , $ G R
S F 1 , $ G R
PFf, [ parameters ]
f: Format number, 1 or 2
P F 1 , $ G R
P , G
F 1 $ R
Averaging start
Averaging now
Held
Not hold nor averaging
Averaging now
Held
Page 63
16.3. Command Format