Weighing Range Function - A&D AD-4405 Instruction Manual

key ..... The key to store the parameters temporarily. Proceed to the
ESC
Press and hold the
Step18 Press the
5.3.

5.3. Weighing Range Function

5.3. 5.3. Weighing Range Function Weighing Range Function Weighing Range Function
The weighing range function can select "single range" or "dual range". Specify each
weighing interval (division) for the multi-interval instrument. Each weighing interval is
displayed according to a net value or gross value.
Caution When single range is used, performing this function is not required.
Example 1
Specified parameters:
First range
Second range
Display
0kg to 50kg :
50kg to 100kg :
0kg
Example 2
Specified parameters:
Display
-40kg to 50kg :
50kg to 60kg :
-40kg
AD-4405 Weighing Indicator
display.
key and press the
ON/OFF
No parameters are changed, CanCel is displayed and the calibration
mode is finished.
key to turn the display off.
ON/OFF
The gross display.
Range = 50.00kg, division 0.02kg
Range = 100.00kg (maximum capacity), division 0.1kg
The first range, division 0.02kg.
The second range, division 0.1kg.
Division = 0.02kg
The net display using a 40kg tare value.
The same parameters as example 1.
The first range, division 0.02kg.
The second range, division 0.1kg.
Division = 0.02kg
0kg
Tare value
40kg
key
ESC
Division = 0.1kg
50kg
Page 17
Cal 0
100kg Gross
Weighing value
Division=0.1kg
50kg 60kg Net
90kg 100kg Gross
Weighing value
5.3. Weighing Range Function