Tare; Weighing Tare; Digital Input (Preset Tare); Clearing Tare - A&D AD-4405 Instruction Manual

7. 7. 7. 7.

Tare

Tare
Tare Tare
The function is used to display a net value with the container weight subtracted from
the total weight, if you place an object into a container to weigh it.
Using a serial interface such as the RS-232C, you can do this from the external
equipment.
When turning the display off with Cf02 1
Caution
When turning the power off, the tare data is cleared.
7.1.1.

Weighing Tare

Operation Place the tare on the weighing unit. Press the
weight after the STABLE mark turns on. The display changes to net.
Caution When displaying a negative gross value, tare can not be used (normally).
To enable tare at zero or a negative gross value, select a Cf 04
7.1.2.

Digital Input (Preset Tare)

Caution The input value is rounded off to the unit of division(weighing interval).
In the case of Cf02 1
zeroed when turning the display on.
When using a multi-interval scale, the usable input range is the first range.
In the case of Cf09 1
Preset tare is stored as one of the Code Memory data. Refer "9. Code
Memory".
Preset tare value can be set via the serial interface.
Step 1 Press the PT key to display the stored tare value.
When tare is cleared or is not used, the value is zero.
Step 2 Enter a new tare value using the
ENTER
key
ESC
7.1.3.

Clearing Tare

When pressing the
displayed.
When zeroing with the
AD-4405 Weighing Indicator
Cf02 1 Cf02 1, 2 2 2 2 or 3 3 3 3 (power-on zero), the displayed value will be Cf02 1
Cf09 1 (To inhibit preset tare), preset tare can not be used.
Cf09 1 Cf09 1
key The key to store a new tare value.
The net is displayed.
The key to return to weight display without changing the stored
value.
TARE
ZERO
Cf02 1, 2 2 2 2 or 3 3 3 3 , the tare data is cleared.
Cf02 1 Cf02 1
- keys.
0 9
key while gross is zero, tare is cleared and gross is
key, tare is cleared.
Page 33
key to store the tare
TARE
Cf 04 parameter.
Cf 04 Cf 04
7. Tare