Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual page 276

276 Monitoring protection with reports and logs
Viewing logs
configuration, you can generate the same log view at a later date without having
to configure the settings each time. You can delete your customized filter
configurations if you no longer need them.
Because logs contain some information that is collected at intervals, you can
refresh your log views. To configure the log refresh rate, display the log and select
from the Auto-Refresh list box at the top right on that log's view.
Note: If you view log data by using specific dates, the data stays the same when
you click Auto-Refresh.
Reports and logs always display in the language that the management server was
installed with.
See About logs" on page 277.
See Saving and deleting custom logs by using filters"
To view a log
1 In the main window, click Monitors.
2 On the Logs tab, from the Log type list box, select the type of log that you
want to view.
3 For some types of logs, a Log content list box appears. If it appears, select
the log content that you want to view.
4 In the Use a saved filter list box, select a saved filter or leave the value Default.
5 Select a time from the Time range list box or leave the default value. If you
select Set specific dates, then set the date or dates and time from which you
want to display entries.
6 Click Advanced Settings to limit the number of entries you display.
You can also set any other available Advanced Settings for the type of log
that you selected.
Note: The filter option fields that accept wildcard characters and search for
matches are not case-sensitive. The ASCII asterisk character is the only
asterisk character that can be used as a wildcard character.
7 After you have the view configuration that you want, click View Log.
The log view appears in the same window.
on page 279.