Table of Contents
Advertisement
274
Monitoring protection with reports and logs
Editing the filter used for a scheduled report
Editing the filter used for a scheduled report
8
In the Run every text box, select the time interval at which you want the
report to be emailed to recipients (hours, days, weeks, months). Then, type
the value for the time interval you selected. For example, if you want the
report to be sent to you every other day, select days and then type 2.
9
In the Start after text box, type the date that you want the report to start or
click the calendar icon and select the date. Then, select the hour and minute
from the list boxes.
10
Under ReportRecipients, type one or more comma-separated email addresses.
You must already have set up mail server properties for email notifications
to work.
11
Click OK to save the scheduled report configuration.
You can change the settings for any report that you have already scheduled. The
next time the report runs it uses the new filter settings. You can also create
additional scheduled reports, which you can base on a previously saved report
filter.
Note: When you associate a saved filter with a scheduled report, make sure that
the filter does not contain custom dates. If the filter specifies a custom date, you
get the same report every time the report runs.
See
Creating scheduled reports"
To edit the filter used for a scheduled report
1
In the console, click Reports.
2
Click Scheduled Reports.
3
In the list of reports, click the scheduled report that you want to edit.
4
Click Edit Filter.
5
Make the filter changes that you want.
6
Click Save Filter.
If you want to retain the original report filter, give this edited filter a new
name.
7
Click OK.
8
When the confirmation dialog box appears, click OK.
on page 273.
Advertisement
Table of Contents
Troubleshooting
