Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual page 250

250 Managing exceptions
Creating exceptions from log events in Symantec Endpoint Protection Manager
Exceptions and log types (continued)
Table 17-4
Exception Type
Tamper Protection
See Monitoring endpoint protection"
Symantec Endpoint Protection Small Business Edition must have already detected
the item for which you want to create an exception. When you use a log event to
create an exception, you specify the Exceptions policy that should include the
exception.
See Managing exceptions for Symantec Endpoint Protection Small Business
Edition" on page 238.
See Creating exceptions for Symantec Endpoint Protection Small Business
Edition" on page 240.
To create exceptions from log events in Symantec Endpoint Protection Manager
1 On the Monitors tab, click the Logs tab.
2 In the Log type drop-down list, select the Risk log, SONAR log, or Application
and Device Control log.
3 Click View Log.
4 Next to Time range, select the time interval to filter the log.
5 Select the entry or entries for which you want to create an exception.
6 Next to Action, select the type of exception that you want to create.
The exception type that you select must be valid for the item or items that
you selected.
7
Click Apply.
8 In the dialog box, remove any items that you do not want to include in the
exception.
9 For security risks, check Log when the security risk is detected if you want
Symantec Endpoint Protection Small Business Edition to log the detection.
10 Select all of the Exceptions policies that should use the exception.
11 Click OK.
Log Type
Application Control log
on page 261.