Configuring The Router For The First Time - Cisco 7604 Configuration Manual

Configuring the Router for the First Time

This chapter contains information about how to initially configure the Cisco 7600 series router, which
supplements the administration information and procedures in these publications:
• Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2, at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/ffun_c.html
Cisco IOS Configuration Fundamentals Configuration Command Reference, Release 12.2, at
•
this URL:
http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html
Note For complete syntax and usage information for the commands used in this chapter, refer to these
publications:
• The Cisco IOS Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
•
The Release 12.2 publications at this URL:
•
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio
n_guides_list.html
This chapter consists of these sections:
Default Configuration, page 3-2
•
Configuring the Router, page 3-2
•
Protecting Access to Privileged EXEC Commands, page 3-15
•
Recovering a Lost Enable Password, page 3-19
•
Modifying the Supervisor Engine Startup Configuration, page 3-20
•
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
OL-4266-08
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
C H A P T E R
3
3-1