Displaying The Nde Configuration - Cisco 7604 Configuration Manual

Configuring NDE
Configuring a Protocol Flow Filter
To configure a protocol flow filter, perform this task:
Command
Router(config)# mls nde flow {exclude | include}
protocol {tcp {dest-port number | src-port number } |
udp {dest-port number | src-port number }}
Router(config)# no mls nde flow {exclude | include}
This example shows how to configure a TCP protocol flow filter so that only expired flows from
destination port 35 are exported:
Router(config)# mls nde flow include protocol tcp dest-port 35
Router(config)#
To display the status of the NDE flow filters, use the show mls nde command described in the
"Displaying the NDE Configuration" section on page

Displaying the NDE Configuration

To display the NDE configuration, perform this task:
Command
Router# show mls nde
This example shows how to display the NDE configuration:
Router# show mls nde
Netflow Data Export enabled
Exporting flows to
Exporting flows from 10.6.58.7 (57673)
Version: 7
Include Filter not configured
Exclude Filter not configured
Total Netflow Data Export Packets are:
Total Netflow Data Export Send Errors:
Netflow Aggregation Enabled
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
51-18
10.34.12.245 (9988)
508 packets, 0 no packets, 3985 records
IPWRITE_NO_FIB = 0
IPWRITE_ADJ_FAILED = 0
IPWRITE_PROCESS = 0
IPWRITE_ENQUEUE_FAILED = 0
IPWRITE_IPC_FAILED = 0
IPWRITE_OUTPUT_FAILED = 0
IPWRITE_MTU_FAILED = 0
IPWRITE_ENCAPFIX_FAILED = 0
Purpose
Configures a protocol flow filter for an NDE flow.
Clears port filter configuration.
51-18.
Purpose
Displays the NDE configuration.
10.34.12.245 (9999)
Chapter 51 Configuring NDE
OL-4266-08