Cisco 7604 Configuration Manual page 417

Configuring IPv4 Multicast Layer 3 Switching
This chapter describes how to configure IPv4 multicast Layer 3 switching on the Cisco 7600 series
routers.
For complete syntax and usage information for the commands used in this chapter, refer to these
Note
publications:
•
•
This chapter consists of these sections:
•
•
•
•
•
•
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Understanding How IPv4 Multicast Layer 3 Switching Works
These sections describe how IPv4 multicast Layer 3 switching works:
•
•
OL-4266-08
The Cisco IOS Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio
n_guides_list.html
Understanding How IPv4 Multicast Layer 3 Switching Works, page 28-1
Understanding How IPv4 Bidirectional PIM Works, page 28-7
Default IPv4 Multicast Layer 3 Switching Configuration, page 28-7
IPv4 Multicast Layer 3 Switching Configuration Guidelines and Restrictions, page 28-8
Configuring IPv4 Multicast Layer 3 Switching, page 28-9
Configuring IPv4 Bidirectional PIM, page 28-23
IPv4 Multicast Layer 3 Switching Overview, page 28-2
Multicast Layer 3 Switching Cache, page 28-2
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
C H A P T E R
28
28-1