Figure 7. Installing Memory - Intel SE7320VP2 User Manual

Hardware Installations and Upgrades
4. Remove the server's cover. See the documentation that accompanied your server chassis for
instructions on removing the server's cover.
5. Locate the DIMM sockets (see Figure 7).
6. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open
position.
7. Holding the DIMM by the edges, remove it from its anti-static package.
8. Position the DIMM above the socket. Align the two small notches in the bottom edge of the
DIMM with the keys in the socket (see inset in Figure 7).
9. Insert the bottom edge of the DIMM into the socket.
10. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips
snap into place. Make sure the clips are firmly in place.
11. Replace the server's cover and reconnect the AC power cord. See the documentation that
accompanied your server chassis for instructions on installing the server's cover.
26
DIMM 2A
DIMM 3B
DIMM 3A

Figure 7. Installing Memory

DIMM 2B
DIMM 1A
DIMM 1B
TP00761