Installing The Processor Heatsink(S) - Intel S5500HCV - Server Board Motherboard Service Manual

Hardware Installations and Upgrades
11. Close the load plate and socket lever: Close the load plate all the way as shown in Figure 18 (Step "A"), push
down on the load plate (Step "B" in Figure 18), and close the socket lever and ensure the load plate tab engages
under the socket lever when fully closed (Step "C" in Figure 18).
12. Install the heatsink(s). See

Installing the Processor Heatsink(s)

Selecting Processor Heatsink(s)
Each processor requires a heatsink. Depending on your chassis, you may need to use either an active or a passive
heatsink. An active heatsink has a fan attached to the heatsink and a cable that must be connected to the server
board. The following table shows the Intel
chassis requires an active or a passive heatsink. For a non-Intel chassis, see the documentation that came with your
chassis.
Intel® Server Board S5520HC and S5500HCV Service Guide
Figure 17. Install the processor
Figure 18. Close Load Plate and Socket Lever
"Installing the Processor Heatsink(s)"
®
Server Chassis compatible with this server board and whether each
for instructions.
40