Installing the Processor
To install a processor, follow these instructions:
1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the server's cover. See the documentation that came with your server
chassis for instructions on removing the server's cover.
5. Locate the processor socket and raise the socket handle completely (see
6. Raise the CPU load plate (see
Note: Do not touch the socket pins; they are very sensitive and easily damaged.
24
Figure 12. ILifting the Processor Socket Handle
Figure
A
Figure 13. Installing the Processor
"Safety
Information".
TP02074
13).
B
NEXXUS4080AL User's Guide
Figure
12).
TP02075