Sas Controller; Sas Raid Support; Sas/Sata Connector Sharing; Network Interface Controller (Nic) - Intel S5000XVNSATA Specification

Workstation board
Table of Contents

Advertisement

Intel® Workstation Board S5000XVN TPS
The workstation board supports the following audio connections through the rear I/O:
The workstation board supports ATAPI CD-ROM (a 1x4-pin ATAPI-style connector for
connecting an internal ATAPI CD-ROM drive to the audio mixer, connector J4A1) audio
connection inside the chassis.
3.4

SAS Controller

The LSI Logic* SAS1064e controller supports x4 PCI Express* link widths and is a single-
function PCI Express* end-point device. The SAS controller supports the SAS protocol as
described in the Serial Attached SCSI Standard, version 1.0. The controller also supports SAS
1.1 features.
The SAS1064e controller supports a 32-bit external memory bus that provides an interface for
Flash ROM and NVSRAM devices.
3.4.1

SAS RAID Support

RAID modes 0, 1, and 10 are supported. You can use an optional SAS RAID Key to support SW
RAID 5.
3.4.2

SAS/SATA Connector Sharing

Four SATA connectors are shared between SATA and SAS, depending on the version of the
workstation board. For SAS workstation boards, four of the six SATA connectors are used for
SAS functionality. For SATA workstation boards, all six SATA connectors are used for SATA
functionality.
3.5

Network Interface Controller (NIC)

Network interface support is provided from the built in Dual GbE MAC features of the ESB2 in
conjunction with the Intel
provide the workstation board with support for dual LAN ports designed for 10/100/1000 Mbps
operation.
Revision 1.5

Figure 17. Rear I/O Panel Audio Connector

®
82563EB compact Physical Layer Transceiver (PHY). Together, they
Intel order number: D66403-006
LINE OUT
LINE IN
MIC IN
Functional Architecture
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5000xvnsatarS5000xvn

Table of Contents