Intel® Workstation Board S5000XVN TPS
7.3
System ID LED and System Status LED
The workstation board provides LEDs for both system ID and system status. These LEDs are
located in the rear I/O area of the workstation board between the PS/2* mouse/keyboard
stacked connectors and the video/serial stacked connectors. The following figure shows the
locations of these LEDs:
A. System ID LED
B. System Status LED
Figure 22. System ID LED and System Status LED Locations
You can illuminate the blue System ID LED using either of two mechanisms:
By pressing the System ID Button on the system front panel, the ID LED will display a
solid blue color, until the button is pressed again.
By issuing the appropriate hex IPMI "Chassis Identify" value, the ID LED will either blink
blue for 15 seconds and turn off or will blink indefinitely until the appropriate hex IPMI
Chassis Identify value is issued to turn it off.
Revision 1.5
Intel order number: D66403-006
Intel® Light Guided Diagnostics
A
B
AF001033
51