Table 35. System Status Led - Intel S5000XVNSATA Specification

Workstation board
Table of Contents

Advertisement

Intel® Light Guided Diagnostics
The bi-color System Status LED operates as follows:
Color
State
Off
N/A
Green/
Alternating
Amber
Blink
Green
Solid on
Green
Blink
Amber
Blink
Amber
Solid on
52

Table 35. System Status LED

Criticality
Not ready
AC power off
Not ready
Pre DC Power On – 15-20 second BMC Initialization when AC is
applied to the server. Control Panel buttons are disabled until BMC
initialization is complete.
System OK
System booted and ready.
Degraded
System degraded
installed).
spare DIMM (memory sparing). This indicates the user no longer
has spared DIMMs indicating a redundancy lost condition.
Corresponding DIMM LED should light up.
and system loses memory redundancy.
apply to non-redundant subsystems.
them fails.
more than minimum number needed to cool the system.
Non-critical
Non-fatal alarm – system is likely to fail
or failed
correctable errors is crossed within the window
Critical, non-
Fatal alarm – system has failed or shut down
recoverable
is present
threshold crossed)
mismatch)
Intel order number: D66403-006
Intel® Workstation Board S5000XVN TPS
Description
Unable to use all of the installed memory (more than one DIMM
Correctable errors over a threshold of 10 and migrating to a
In mirrored configuration, when memory mirroring takes place
Redundancy loss such as power-supply or fan. This does not
PCI Express* link errors
CPU failure/disabled – if there are two processors and one of
Fan alarm – Fan failure. Number of operational fans should be
Non-critical threshold crossed – Temperature and voltage
Critical voltage threshold crossed
VRD hot-asserted
Minimum number of fans needed to cool the system not present
In non-sparing and non-mirroring mode if the threshold of ten
DIMM failure when there is one DIMM present, no good memory
Run-time memory uncorrectable error in non-redundant mode
IERR signal asserted
Processor 1 missing
Temperature (CPU ThermTrip, memory TempHi, critical
No power good – power fault
Processor configuration error (for example, processor stepping
Revision 1.5

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5000xvnsatarS5000xvn

Table of Contents