Selecting the Printer Settings
Default Font
You can select the default font for the current interface. The default font can be one of the internal
fonts or a font that is downloaded to the machine memory or stored on memory card or hard disk.
The following settings are available:
•
•
•
•
•
•
Note
You can set the font for each interface.
Selecting the Default Font
1
Press the [Printer] key. The machine enters the printer mode.
2
Press [Printer Menu].
3
Press [Font].
4
Press [Font selection].
5
Select the desired interface tab.
6
Press or to select font ID.
2-14
Selecting the Default Font
Changing the Default Font Size
Character Pitch for Courier/Letter Gothic
Selecting Regular or Dark Courier/Letter Gothic
Setting the Code Set
Printing Lists of Fonts
Select item.
Printer menu
Print Sta-
Font
tus Page
Interface
Page Set
Print
Emulation
Quality
Font
Font
selection
Printer menu
Font
Font ID
I000
Parallel
Network
Printer menu
- Font
Paper
Hard Disk
Handling
Back
Code Set
Code Set
Back
Courier
Internal
Dark
Configuration
USB
Othe