Changing The Default Font Size; Character Pitch For Courier/Letter Gothic - Kyocera TASKalfa 820 Operation Manual

Characters displayed before font numbers indicate the following items. For internal font numbers,
refer to Printing Lists of Fonts on page 2-17.
Display
I
S
M
H
O
7 Press [Close] and returns to the Font screen.
8
Press [Close] and returns to the Printer menu screen.

Changing the Default Font Size

If you have selected a proportional font as the default font, you can set the font size. If you have
selected the Courier font or the Letter Gothic font as the default font, only the Character Pitch
setting displays.
1
Access Font, refer to Selecting the Default Font on page 2-14.
2 Press [Font selection].
3 Press [Detail].
4 Press [+] or [-] or use the numeric keys
to enter the character size. The
character size can be set between 4 and
999.75 points, in 0.25-point increments.
5
Press [Close] and returns to the Font screen.

Character Pitch for Courier/Letter Gothic

You can set the character pitch for fixed fonts when the default font is Courier or Letter Gothic.
1 Access Font, refer to Selecting the Default Font on page 2-14.
2
Press [Font selection].
Description
Internal font
Downloaded fonts
Fonts in memory card
Fonts in RAM disk or optional hard disk
Fonts in optional ROM
Selecting the Printer Settings
Font
Font ID I000
Parallel Network
Printer menu - Font
Configuration
(4.00 ~ 999.75)
4.00
Size Point
(0.25)
(0.25)
Printer menu - Font
Back
Courier
Internal
Dark
Configuration
USB
Back
2-15