Envelope Size Support - Lexmark Optra T Reference

Envelope Size Support

The literal names in Table 4-11 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source.
Therefore, when these operators are used, part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the
following PostScript emulation sequence. The following example uses a 3.875 x 7.5
envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
Table 4-11: Envelope Sizes Supported
 Supported
✘ Not Supported
Envelope Sizes
Literal Name Size (mm)
3.875x7.5envelope 98.4 x 190.5
3.875x8.875envelope 98.4 x 225.4
4.125x9.5envelope 104.8 x 241.3
110x220envelope 110 x 220
162x229envelope 162 x 229
176x250envelope 176 x 250
1
otherenvelope Other
1
For other envelopes, the page is formatted to 216 x 356 mm (8.5 x 14 in.) unless a size is specified by your software
application.
Size (inches) Size (points)
3.875 x 7.5 [279 540]
3.875 x 8.875 [279 639]
4.125 x 9.5 [297 684]
4.33 x 8.66 [312 624]
6.38 x 9.01 [459 649]
6.93 x 9.84 [499 708]
[612 996]
4-25
Printer Model
        
        
        
        
        
        
        
PostScript
✘
✘
✘
✘
✘
✘
✘