Lexmark Optra T Reference page 244

Table 4-16: Page Device Parameters (Continued)
Key
SlipSheetDetails
Staple
TraySwitch
Tumble
Type Definition
dictionary Specifies the following two unique separator sheet parameters: SlipSheetSource
and Type.
SlipSheetSource is an integer type parameter which identifies the source used for
separator sheets. Supported values are:
Null
0
1
2
3
4
5
6
The key is found in the DeviceRenderingInfo dictionary within pagedevice. It can
be altered using a setpagedevice operator.
/SlipSheetDetails << /Type 96
/SlipSheetSource n>> >> setpagedevice
Type is a constant value. To find the value of Type for your printer, see Table C-2
on page C-5.
integer Specifies whether to staple the current print job.
Supported values are:
0 Do not staple print job.
3 Staple after each set.
The format for setting the Staple key is:
<</Staple n>> setpagedevice
boolean Indicates tray linking is always active. When the media in one input source is
depleted, other input sources are searched to determine if the same media can
be found in another source. If another source is found, the alternate source is
selected. The media in both input sources must be the same size and type for
tray linking to occur.
boolean Indicates the orientation of the second side of a duplexed page with respect to
the first side. Supported values are:
True
False
4-76
Use current source (default)
Tray 1
Tray 2
Envelope Feeder
Tray 3
Multipurpose feeder
Tray 4
Tray 5
Causes pages to print as if they are to be bound across the top of
the page (image is rotated 180 ° on the back side of the page)
Causes pages to print as if they are to be side bound (as in a book)
PostScript