Device Attendance Commands - Lexmark Optra T Reference

Device Attendance Commands

To determine which commands your printer supports, see Table B-15: "Device
Attendance Commands" on page B-23.
RDYMSG Command
The RDYMSG command is used to specify a message that appears on the first line of
the printer operator panel display or through MarkVision whenever the printer is
ONLINE (in the
Busy
Syntax:
@PJL RDYMSG DISPLAY = "message"[<CR>]<LF>
OPMSG Command
When an OPMSG command is received, the message appears and is allotted both
lines of the display. The printer is taken OFFLINE. This message, along with the
STMSG command, is the lowest priority, so if another intervention occurs, it displays
instead.
Note:
A printer reset is not available from the printer operator panel or through MarkVision
while
Syntax:
@PJL OPMSG DISPLAY = "message"[<CR>]<LF>
or
Ready Busy
message.
Refer to your printer user documentation for information about how to return
your printer to the ONLINE state. Once in the ONLINE state, the
or message appears on the printer operator panel display or through
Waiting
MarkVision.
OPMSG displays.
3-73
state). This message displays instead of the
PJL
or
Ready
, ,
Ready Busy