Comment Command - Lexmark Optra T Reference

ENTER LANGUAGE Command
This command causes the printer to enter the specified language, such as
PCL emulation, PostScript emulation, or PPDS.
Syntax:
@PJL ENTER LANGUAGE = language[<CR>]<LF>
Notes:
•
is
language
•
You can use uppercase, lowercase, or mixed case. (
all others can be mixed or lowercase.)
Example:
@PJL ENTER LANGUAGE = PostScript[<CR>]<LF>
enters PostScript emulation.

COMMENT Command

This command lets you add descriptive comments to your PJL job.
Syntax:
@PJL COMMENT words[<CR>]<LF>
Notes:
•
When the printer receives this command, it is ignored.
•
The parameter can be any combination of printable characters,
words
spaces, and horizontal tabs.
•
The COMMENT command is terminated by the line feed character (<LF>).
, , , or
PCL PCLXL PostScript
3-3
.
PPDS
must be uppercase;
@PJL
PJL