Postscript Envelope Size Support - Lexmark X548de Tehnical Manual

PostScript (PS) emulation
= Supported
X = Not supported
Operator Tray selected (corresponding image size is set)
a5tray tray with A5-size paper
a6tray tray with A6-size paper
b4tray tray with B4‑size paper
b5tray tray with B5-size paper
customtray tray with custom-size paper
executivetray tray with executive-size paper
foliotray tray with folio-size paper
ledgertray tray with ledger‑size paper
legaltray tray with legal-size paper
lettertray tray with letter-size paper
oficiotray tray with oficio‑size paper
statementtray tray with statement-size paper

PostScript envelope size support

The literal names in "Envelope sizes supported" on page 15 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source. Therefore, when these operators are used,
part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation
sequence. The following example uses a 3.875 x 7.5 envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
Envelope sizes supported
= Supported
X = Not supported
Envelope sizes
Size name Literal name
7 3/4 3.875x7.5envelope
Commercial 9 3.875x8.875envelope
Commercial 10 4.125x9.5envelope
* For other envelopes, the page is formatted to 215.9 x 355.6 mm (8.5 x 14 in.) unless a size is specified by your software
program.
Size (mm) Size (inches)
98.4 x 190.5 3.875 x 7.5
98.4 x 225.4 3.875 x 8.875
104.8 x 241.3 4.125 x 9.5
Printer models
X548de, X548dte
X
X
X
Printer
models
Size (points) X548de,
X548dte
279 x 540
279 x 639
297 x 684
15