Default Command - Lexmark Optra T Reference

DEFAULT Command

This command modifies the default setting for the specified environment variable and
stores the setting in the printer NVRAM. The new setting is activated with the
occurrence of the next PJL reset condition.
Syntax:
@PJL DEFAULT [command modifier:value] variable=value[<CR>]<LF>
[command modifier:value]
The
[command modifier:value]
to be modified. The variables supported are listed in the tables beginning on
page 3-12.
•
A
[command modifier:value]
in the tables "Common Variables for Both Printer Languages" on page 3-12,
and "Printer Unique Variables for Both Printer Languages" on page 3-19.
•
LPARM:PCL
"Common Variables for PCL Emulation" on page 3-45, and "Printer Unique
Variables for PCL Emulation" on page 3-46.)
•
LPARM:POSTSCRIPT
(See the tables "Common Variables for PostScript Emulation" on page 3-48,
and "Printer Unique Variables for PostScript Emulation" on page 3-49.)
•
LRESOURCE:
ables. (See the table "Printer Unique LRESOURCE Variables" on
page 3-50.)
Values for "
device
filename
filetype
parameter specifies the type of PJL variables
parameter is not required for variables listed
is used with variables specific to PCL emulation. (See the tables
is used for variables specific to PostScript emulation.
"
device:filename.filetype
device:filename.filetype
, ,
flash flash1 disk
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID
for a PCL font, and so on. The
An identifier that categorizes the file, such as
PCL macros or
p5symset
Table 3-22 "Variables for Flash and Disk File and Password
Commands" on page 3-80 for a complete list of the
supported file types. The
3-8
" is required for LRESOURCE vari-
" are:
, or (case insensitive)
disk1
is case sensitive.
filename
for PCL symbol sets. See
is case sensitive.
filetype
PJL
for
p5macro