Forward And Backward Compatibility Modes For Optra C710, Optra M410, Optra M412, Optra T Family, And Optra W810 - Lexmark Optra T Reference

You can also select fonts using PJL commands. The selection parameter is the
number portion from the font identifier shown on the font sample pages, such as 0 or
76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning
on page 2-29 to select a symbol set. If a symbol set does not have a PJL value, use
the symbol set ID to select the symbol set. A font selection can be either temporary or
set as the default.
Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER,
PITCH, PTSIZE, SYMSET, SET, DEFAULT. See Table 3-5: "Common Variables for
PCL Emulation" on page 3-45 for more information about these commands.
Forward and Backward Compatibility Modes for Optra C710,
Optra M410, Optra M412, Optra T Family, and Optra W810
Your PCL emulation has forward and backward compatibility modes. The forward
compatibility mode is used to emulate the fonts in the Hewlett-Packard Company's
LaserJet 4050. The backward compatibility mode is used for compatibility with the
Hewlett-Packard Company's LaserJet 5 and the Lexmark Optra S family of printers.
Standard PCL Emulation Fonts
Table 2-13 on page 2-25 lists the font selection commands for forward and backward
compatibility mode for each of the 47 standard PCL emulation fonts. Since the font
selection commands for the forward and backward compatibility modes are identical,
they are listed together in the table. Most fonts are assigned a font group indicating
which symbol sets that font supports.
2-24
PCL