Printer Unique Variables For Both Printer Languages - Lexmark Optra T Reference

Printer Unique Variables for Both Printer Languages

The following variables are unique to some Lexmark printers and are supported for
both PCL emulation and PostScript emulation. Therefore, the [
modifier:value
To determine which variables your printer supports, see Table B-2: "Printer Unique
PJL Variables for Both Printer Languages" on page B-4.
Table 3-4: Printer Unique Variables for Both Printer Languages
Variable
LACTIVEBINRESET
(DEFAULT only)
LADVANCEDSTATUS
(DEFAULT only)
(Port specific)
LALARMCONTROL
(DEFAULT only)
LAUTOCRLF
LAUTOLFCR
LBLANKPAGES
LBONDLENGTH
(DEFAULT only)
LBONDLOADING
(DEFAULT only)
] parameter should not be specified.
Function Selections
Active Bin MANUAL, AUTOMATIC
Reset
Advanced ON, OFF
Status
ON enables parallel bidirectional support.
OFF disables parallel bidirectional support.
Alarm Control OFF, SINGLE, CONTINUOUS
Auto CR after ON, OFF
LF
Auto LF after ON, OFF
CR
Blank Pages DONOTPRINT, PRINT
Note: Some printers have a fixed value of
DONOTPRINT.
Bond Length NORMAL, SHORT
Bond Paper OFF, DUPLEX
Loading
3-19
command
PJL
Factory Default
MANUAL
ON
SINGLE
OFF
OFF
DONOTPRINT
NORMAL
OFF