Envelope Size Support - Lexmark T642 Technical Reference

Envelope Size Support

The literal names in Table 4-3 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source.
Therefore, when these operators are used, part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the
following PostScript emulation sequence. The following example uses a 3.875 x 7.5
envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
Table 4-3: Envelope Sizes Supported
Supported
Not Supported
Envelope Sizes
Literal Name
3.875x7.5envelope
3.875x8.875envelop
e
4.125x9.5envelope
110x220envelope
162x229envelope
176x250envelope
otherenvelope
otherenvelope
1
For other envelopes, the page is formatted to 216 x 356 mm (8.5 x 14
in.) unless a size is specified by your software program.
Size (mm) Size (inches)
98.4 x 190.5 3.875 x 7.5
98.4 x 225.4 3.875 x 8.875
104.8 x 241.3 4.125 x 9.5
110 x 220 4.33 x 8.66
162 x 229 6.38 x 9.01
176 x 250 6.93 x 9.84
1
Other
Other
4-9
PostScript
Printer Models
Size
(points) W840
[279 540]
[279 639]
[297 684]
[312 624]
[459 649]
[499 708]
[612 996]
[841 842]