Lexmark Optra T Reference page 274

Table 4-19: PostScript Emulation Device Parameters (Continued)
Key Type
Writeable boolean
Device Parameters for the IODevice %rom%
BlockSize integer
Free integer
HasNames boolean
InitializeAction integer
LogicalSize integer
Mounted boolean
PhysicalSize integer
Removable boolean
Searchable boolean
SearchOrder integer
Type name
Writeable boolean
4-106
Definition
(Read-only) Indicates if the files on the flash can be opened for write
access. A write-protected flash returns False. When the flash is not
mounted, this parameter indicates if the device supports writeable media.
(Read-only)
(Read-only) Indicates the amount (in pages) of free space available in
ROM. Valid only if the ROM is mounted (mounted is set to True). A value of
0 (zero) indicates that either the ROM is not mounted or it is full.
(Read-only) Indicates if ROM supports named files. Valid only if ROM is
mounted (mounted is set to True). If ROM is not mounted, this parameter
has a value of False.
(Read-only) Always returns a value of 0 (zero), which indicates no action.
(Read-only)
True System attempts to mount the ROM.
False System attempts to dismount the ROM.
When a device is mounted, it becomes known to the system and is
readable, depending on the nature of the device.
A device must contain a valid file system or it will not mount successfully. To
verify if the device is currently mounted, query this parameter immediately
after setting it.
If the ROM device is dismounted, unpredictable results occur.
(Read-only) Indicates the size of the ROM (in pages) that is mounted. A
value of 0 (zero) indicates that the device is not mounted. This parameter is
only valid when ROM is mounted.
(Read-only) Always False.
(Read-only) Indicates if ROM participates in searches in file system
operations that specify a filename without specifying a device.
(Read-only) If the Searchable parameter is True, indicates the priority
assigned to the ROM when searching for a file and no device has been
specified. A lower integer indicates a higher priority. If the Searchable
parameter is False, the value of this integer has no meaning.
(Read-only) Always returns the value of /FileSystem.
(Read-only) Indicates if the files on the ROM can be opened for write
access. Always False.
PostScript