Common Variables For Postscript Emulation - Lexmark Optra T Reference

Table 3-6: Printer Unique Variables for PCL Emulation (Continued)
Variable
LFONTCOMPATIBILITY
LFONTPRIORITY
(SET only)

Common Variables for PostScript Emulation

Note:
Use these variables only for PostScript emulation. The
parameter should be specified as
@PJL SET LPARM:POSTSCRIPT JAMRECOVERY=OFF[<CR>]<LF>
To determine which variables your printer supports, see Table B-5: "Common
Variables for PostScript Emulation" on page B-12.
Table 3-7: Common Variables for PostScript Emulation
Variable
JAMRECOVERY
PRTPSERRS
Function Selections
Font Compatibility PCL5, PCL6
Level
Font Priority Search RESOLUTION, NORESOLUTION
When RESOLUTION is specified, your printer is
compatible with the Hewlett-Packard Company's
LaserJet printers.
When NORESOLUTION is specified, font
resolution is removed from the font selection
priority criteria.
The word common applies to those variables common to both your printer
and the Hewlett-Packard Company's LaserJet printers.
Function Selections
Jam Recovery ON, OFF
For queries, when the Jam Recovery setting is set
to Auto, PJL returns the value of OFF. The
remaining two Jam Recovery values, On and Off
are returned by PJL as ON and OFF respectively.
When PJL is used to set Jam Recovery OFF, the
setting is actually set to Auto. When PJL is used to
set Jam Recovery ON, the setting is set to ON.
Changing this variable also affects PCL emulation.
Print PS Errors ON, OFF
3-48
[command modifier:value]
: . For example:
LPARM POSTSCRIPT
PJL
Factory Default
PCL6
RESOLUTION
Factory
Default
OFF
OFF