Display - HP T5145 - Thin Client - Tower Administrator's Manual

Local Login Options
●
Local Auto Login: Select the option you want. By default, the unit automatically logs in as
Administrator.
NOTE:
appeared in the center of the screen, press and hold the left
●
Administrator Password: Click Set Password to change the current administrator password.
●
User Password: Click Set Password to change the current user's password.
Stateless and Broker Login Options
●
Default Username: You can specify a default user in this field.
● Default Password: Click Set Password to define a default password.
●
Default Domain: You can specify a default domain in this field.
●
Auto Login: Select to enable auto login.
●
Clear Credentials
Brokers
NOTE: Brokers give a list of connections. If Auto Connect is enabled for a broker and only one
connection of that type is returned, it will automatically connect. Otherwise this setting is ignored.
●
Program Neighborhood / XenDesktop: Select to enable access to the Citrix Program
Neighborhood/XenDesktop broker.
◦
Configure: Click to select Auto Connect and to identify the server.
●
Leostream: Select to enable access to the Leostream connection broker.
◦
Configure: Click to select Auto Connect and to identify the server.
●
Provision: Select to enable access to the Provision Networks connection broker.
◦
Configure: Click to select Auto Connect and to identify the server.
●
VMware View: Select to enable the VMWare broker.
◦
Configure: Click to select Auto Connect and to identify the server.
● HP SAM: Select to enable the HP SAM broker.
◦ Configure: Click to select Auto Connect and to identify the server.

Display

Use the Display tab to change the following settings:
● Video
●
Inactivity Action
Go to Settings > Display to set the following options:
26 Chapter 2 Installation
To interrupt an auto login during boot up: when the GUI has started and the HP logo has
Shift key.
ENWW