Printers - HP T5145 - Thin Client - Tower Administrator's Manual

Device Manager
●
Enable HP Device Manager: Select to start Device Manager on boot.
Set/Reset Defaults
●
Reset to Factory: Click to reset the thin client to the factory default.
●
Import Factory Profile: Click to select a profile to replace the original factory default with a
company or other default. If a new profile is imported, Reset to Factory will reset to this new profile.
NOTE:

Printers

Use the Printer tab to add, modify, and delete printers from the thin client.
To add a printer, simply choose the type of printer connection you want to add.
The following Add Printer options are available:
● + LPT: Add a parallel printer
● + USB: Add a USB printer
●
+ LPD: Add an LPD printer
●
+ Thinprint: Add a Thinprint printer
●
+ Samba: Add a Samba printer
ENWW
Use HP ThinState to create a replacement default.
Settings 57