HP T5145 - Thin Client - Tower Administrator's Manual page 43

●
Authentication Type: Select the authentication type.
◦
NONE
◦
WEP
◦ PSK
◦
EAP
●
Configuration: If the authentication type is WEP, supply the following configuration settings:
◦
Network Type: Select either Infrastructure or Adhoc.
◦
Authentication Mode: Set the wireless authentication mode to Auto, Open, or Share.
◦
Encryption Mode: Set the encryption mode to WEP 64bit or WEP 128bit.
◦
Wep Key: Type or select to use from 1 - 4 of the available keys.
◦
Wep Key 1–4: Set to Hex (hexadecimal) or ASCII, then click Set and type the WEP key
(password) as established by the network's wireless administrator in the fields.
NOTE:
If the authentication type is PSK, supply the following configuration settings:
◦
Network Type: Select either Infrastructure or Adhoc.
◦
Authentication Mode: Set the wireless authentication mode to either WPA-PSK or WPA2-
PSK.
ENWW
The WEP key must be entered as a hexadecimal or ASCII value.
Settings 37