Samba Printer
To add a Samba printer:
1.
Click the + Samba button, and the following window is displayed:
2.
In the Printer Name field, type a name for the printer.
For a Samba printer, the printer name should be the name of the shared printer of the samba
printer.
For example: < myprinter ==>, where "myprinter" is the printer name.
3.
(Optional). In the Printer Description field, type a description for the printer.
4.
From the Spooler Size list, select how large you want the print spooler to be, from 1 MB up to 10
MB.
5.
(Optional) In the Windows Driver field, type a driver name.
Citrix ICA and rdesktop use this field to set the printer driver for the session. You must type the
Windows driver name exactly as it is on the server.
6.
Select Enable Form Feed to use form feed.
7.
If desired, click Test Printer to send a sample job to the printer.
8.
In the Address field, type the print server IP address.
NOTE:
9.
In the Shared Printer field, type a name for the printer.
For a Samba printer, the printer name should be the name of the shared printer of the samba
printer.
For example: < myprinter ==>, where "myprinter" is the printer name.
10.
In the Username field, type the user name for the account you want the printer to use to log into
the remote computer.
11.
Next to Password, click Set Password, and then type the password for the account you want the
printer to use to log into the remote computer.
12.
(Optional) In the Workgroup field, type the Windows domain workgroup.
62
Chapter 2 Installation
For a Samba printer, you must populate the Address, Username, and Password fields.
ENWW