d.
Click OK on the information message.
e.
Close the hpthinstate customized settings dialog box.
6.
Select the target USB flash drive from the list.
(Optional Destination) Select Capture the settings and save it on FTP server to save settings
to a FTP server and type the FTP Server Address, File Path, Username, Password, and New
Filename.
NOTE:
NOTE:
server is selected, a file with an xml extension will be created.
7.
Click Capture.
8.
At the Network User Password window, select Yes to apply a network password to the captured
settings file or select No to ignore network password while logging on in Stateless mode.
The Network user password is used for network user login authentication and is only available in
Stateless mode.
9.
Click OK on the information message.
Settings capture is complete. Remove the USB flash drive.
ENWW
This function is only supported on thin clients with at least 256 MB RAM.
If a USB flash drive is selected as the destination, a tgz file will be created. If an FTP
Settings
45