HP T5145 - Thin Client - Tower Administrator's Manual page 24

To configure primary and secondary connections:
Go to Settings > Connections.
▲
●
To make a connection a secondary connection:
1. Simply drag and drop a primary connection on top of another primary connection.
The connection is then indented in the connection list and is secondary to the primary
connection directly above it.
NOTE:
it a secondary connection by dragging and dropping it on top of another primary connection,
the primary and all secondary connections become secondary under the destination primary.
2. Click Save and Restart Session to save your changes.
NOTE:
listed above it, the connection at the top of the list must be a primary connection.
18 Chapter 2 Installation
If a primary connection has one or more secondary connections, and you are making
Since each secondary connection must have an associated primary connection
ENWW