Login & Brokers - HP T5145 - Thin Client - Tower Administrator's Manual

Login & Brokers
Use the Login & Brokers tab to change the Thin Client State.
Go to Settings > Login & Brokers to set the following options:
▲
● Initial Thin Client State: From this menu you can select Local or Stateless mode. By default, the
thin client is in Local mode.
You can change this setting if you want to operate the unit in Stateless mode, which pulls the
user .xml profiles from an FTP server. In Stateless mode, all of the settings are stored on the
network and not locally.
●
Auto Detect Stateless Environment: Select to auto detect the stateless environment.
Stateless Options
●
Skip Stateless User: Select and thin client does not prompt for username and password on boot
and uses only global .xml settings. This only applies when in Stateless mode.
●
Retain Stateless Settings: Select to enable this setting. If you enable this setting in Stateless
mode, the thin client retains the last successful settings file used.
NOTE:
on the thin client until a different user successfully logs in.
●
Ignore Legacy Stateless Passwords: Select if you want the log in manager to ignore access-
specific passwords that may exist inside a user profile and allow that user profile to be loaded. If
this setting is not enabled, you cannot use profiles that have access passwords.
● Keep Local Connections: Select to retain local connections.
●
Keep Local Printers: Select to retain local printers.
ENWW
Using this feature could create a security risk because the previous user's settings remain
Settings 25