Experience - HP T5145 - Thin Client - Tower Administrator's Manual

Inactivity Action
●
Enable Inactivity Action: Select to enable inactivity action.
●
Inactivity timeout: Select or type the amount of time.
● Inactivity Action: Select an inactivity action.
◦
Turn Monitor Off
◦
EcoMode: When the session ends, the monitor is turned off. Press the power button to turn
the monitor back on.
◦
Power Off
◦
Logout
◦
Reboot
●
Locking: Select to require a password to unlock the session after the specified inactivity timeout
and action. You will also have to set the password:
◦
if the mode is Local
◦
if the mode is Stateless but there is no user profile password
◦
if a Broker was used for the session but no broker password was used
With the Locking option enabled, a password is required to resume the session.
◦
If you set a password when you enabled the Locking option, the system prompts for that
password.
◦
If you did not set a password:
If the mode is Stateless, the user profile password is required.
If a broker was used for the session, the broker password entered for that session is required.

Experience

Use the Experience tab to change the following settings:
●
Desktop
●
Time & Date
● Input
●
Boot Splash
●
Login Prompt
●
Volume
28 Chapter 2 Installation ENWW