HP T5145 - Thin Client - Tower Administrator's Manual page 66

1. Click the + LPD button, and the following window is displayed:
2. In the Printer Name field, type a name for the printer.
For example: < myprinter ==>, where "myprinter" is the printer name.
3. (Optional). In the Printer Description field, type a description for the printer.
4. From the Spooler Size list, select how large you want the print spooler to be, from 1 MB up to 10
MB.
5. (Optional) In the Windows Driver field, type a driver name.
Citrix ICA and rdesktop use this field to set the printer driver for the session. You must type the
Windows driver name exactly as it is on the server.
6. Select Enable Form Feed to use form feed.
7. If desired, click Test Printer to send a sample job to the printer.
8. In the Address field, type the print server IP address.
NOTE:
9. In the Username field, type the user name for the account you want the printer to use to log into
the remote computer.
10. Click Set Password, and then type the password for the account you want the printer to use to log
into the remote computer.
11. Click OK to save changes.
To make this printer the default printer, go to Settings > Printer and simply drag and drop the printer
to the top of the list.
60 Chapter 2 Installation
For an LPD printer, you must populate the Address field.
ENWW