Disconnect A User Session For Later Use - HP t100 Maintenance And Service Manual

Disconnect a User Session for Later Use

You can disconnect a standard user from the MultiPoint Server system when the user has temporarily
stepped away from the station, and you do not want to end the user's session or lose any work. The
user can also disconnect the session, rather than you disconnecting the session for them. Users receive
a warning that the connection is about to end and are prompted to save their work. While a user is
disconnected, their session remains active in the MultiPoint Server system's computer memory until that
computer is shut down or restarted. At that time, all disconnected sessions are ended without a chance
to save work.
After a standard user has been disconnected, he or she can log onto the same or another station and
continue to work in the session.
To disconnect a user
1. In Normal mode, click the Desktops tab.
2. Select the check box adjacent to the name of the user or users that you want to disconnect.
3. Click the Disconnect button. Status for the connection states Disconnecting and then changes to
Disconnected after the connection has been disconnected.
Disconnect a User Session for Later Use
145