Removing An External 5.25-Inch Drive - HP t100 Maintenance And Service Manual

Removing an External 5.25-inch Drive

CAUTION:
computer.
To remove a 5.25-inch external drive:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Rotate the drive cage to its upright position.
Figure 6-18
5. If removing an optical drive, disconnect the power cable (1) and data cable (2) from the rear of
the optical drive.
Figure 6-19
62 Chapter 6 Removal and Replacement Procedures
All removable media should be taken out of a drive before removing the drive from the
(Access Panel on page
(Bezel Blanks on page
Rotating the Drive Cage Up
Disconnecting the Power and Data Cables
(Preparation for Disassembly on page
43).
45).
42).