Display Assembly; Remove The Bottom Cover (See Bottom Cover; Disconnect The Battery Cable From The System Board (See Battery - HP ZBook 15u Maintenance And Service Manual

G6 mobile workstation
Table of Contents

Advertisement

Display assembly

NOTE:
Displays are not available as whole assemblies – only subcomponent spare parts are available.
Additional display assembly spare part information is available at
on page
23.
Before removing the display assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the display assembly:
1.
Disconnect the antenna cables from the WWAN module (1) and the WLAN module (2).
2.
Remove the antenna cables from the clips built into the computer (3).
3.
Disconnect the display cable (4) and the camera cable (5) from the system board.
4.
Remove the cables from the clips built into the computer (6).
5.
With the computer upside down, open the display, and then place the computer on a table with the
display positioned off the edge of the table.
6.
Remove the five Phillips M2.5 × 4.0 screws (1) from the display hinges.
(Preparation for disassembly on page
Bottom cover on page
32).
Display assembly subcomponents
32).
Battery on page
44).
Component replacement procedures
65

Advertisement

Table of Contents
loading

Table of Contents