HP t100 Maintenance And Service Manual page 39

Table 3-6 Computer Setup—Advanced (for advanced users) (continued)
Option Description
●
●
●
●
Management Devices The Management Devices menu will only be displayed in the Advanced menu when the BIOS
detects multiple management options.
This option is for installed NIC cards that support ASF or DASH. Use the Management Devices
menu to select if the BIOS management operations will be through the embedded solution or one of
the installed NIC cards.
Management
Allows you to set:
Operations
●
●
●
●
controller from being used by the operating system and reduces the power used by the
computer in S5.
Integrated Video (enable/disable). Allows you to use integrated video and PCI or PCIEx1 Up
Solution video at the same time.
NOTE:
After Integrated Video is enabled and changes saved, a new menu item appears
under Advanced to allow you to select the primary VGA controller video device.
Inserting a PCI Express x16 video card automatically disables Integrated Video. When a PCI
Express x16 video card is installed, Integrated Video cannot be enabled.
Multi-Processor (enable/disable). This option may be used to disable multi-processor support
under the OS.
Internal speaker (some models) (does not affect external speakers).
NIC PXE Option ROM Download (enable/disable). The BIOS contains an embedded NIC
option ROM to allow the unit to boot through the network to a PXE server. This is typically used
to download a corporate image to a hard drive. The NIC option ROM takes up memory space
below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This space is
limited. This F10 option will allow users to disable the downloading of this embedded NIC
option ROM thus giving more DCH space for additional PCI cards which may need option
ROM space. The default will be to have the NIC option-ROM-enabled.
MEBx Setup Prompt (enable/disable). Enabling this feature displays the CTRL+P prompt
during POST. Disabling this feature prevents the prompt from being displayed. However,
pressing Ctrl+P still accesses the utility used to configure manageability settings.
The CTRL+P function activates the MEBx Setup menu. If the Setup Password is configured, the
user will be prompted to correctly enter it before being allowed to enter the MEBx Setup. It the
password is entered incorrectly three times, the MEBx Setup will not be activated.
SOL Character Echo (enable/disable). Some remote consoles print remotely-entered characters
which can cause the characters to appear twice (once when entered remotely and once when
echoed back from local client video). This option allows the administrator to have the SOL
terminal emulator suppress echoing remotely-entered characters to the local video display.
SOL Terminal Emulation Mode (enable/disable). Selects between VT100 and ANSI SOL
terminal emulation. SOL terminal emulation mode is only activated during remote AMT
redirection operations. The emulation options allow administrators to select which mode works
best with their console.
SOL Keyboard (enable/disable). Disable or enable client keyboard during SOL sessions.
Some remote remediation may involve having the local client boot a remote image provided
by an administrator. This option determines if the BIOS will keep the local keyboard enabled
or disabled for possible local client interaction. If the local keyboard is disabled, all keyboard
input is only accepted from the remote source.
Computer Setup (F10) Utilities
29