HP t100 Maintenance And Service Manual page 142

4. Connect a keyboard and mouse to the USB hub:
5.
Connect the power cord of the video monitor to a power outlet.
6.
Turn on the computer.
7.
MultiPoint Server starts. Follow the instructions that appear on the new station's video monitor to
associate the devices to the new station.
To set up a station with a multifunction hub
1.
Before you can connect a new station, end all user sessions, and then shut down the computer and
other powered devices in your MultiPoint Server system.
NOTE:
MultiPoint Server computer. Try setting up your new multifunction hub and station hardware
without shutting down the entire MultiPoint Server system first. If the new station does not function
correctly, restart the MultiPoint Server system.
2. Connect the new video monitor cable to the DVI or VGA video display port on the multifunction
hub as shown in the following illustration:
3. Connect the new multifunction hub to an open USB port on the computer:
4. Connect a keyboard and mouse to the PS2 connectors on the multifunction hub:
5.
Connect the power cord of the video monitor to a power outlet.
132 Appendix E Managing Hardware
Some multifunction hubs do not require a system restart when you connect them to a